Comparison between Xiaoben Technology's program-controlled switch optical port board and other brands of optical terminal multiplexing equipment

其他品牌复用设备

As shown in the topology diagram above:

1. When deploying reusable devices in four locations with other brands of hosts, paired reusable devices need to be deployed in each direction.

① An additional cost of 8 multiplexing devices is required, with each additional remote device requiring an extra pair of multiplexing devices.

② An equal number of FXOs as four remote FXS users need to be added to the system host. If there are a total of 500 FXS users on the remote end, an additional 500 FXOs need to be added to the central end host.

Shollper Technology SPC9900 Programmable Switch Optical Interface Board

The SPC9900 programmable switch optical interface board of Xiaoben Technology can be directly connected to remote devices through optical fibers.

① No additional cost for reusing equipment is required.

② There is no need to increase the number of FXOs in the host like other brands of hosts.

③ Deploy four different directions on one board.

The remote end of the SPC9900 program-controlled switch optical interface board can be connected to different devices:

① If the remote end uses SPC6600-510 remote transmission equipment, there is no need to configure an optical port board at the remote end.

② If the remote device is another programmable device, the remote device only needs to be configured with an optical interface board (the remote device does not require an MCU main control board).